Temecula Premier Painting is the trusted choice for front door painting in Temecula, CA and the rest of Riverside County, specializing in entry door enamel finishes, steel garage door repainting and association colour compliance. We offer wood garage door refinishing and door frame touch-ups.
Our team provides cleaning and scuff-sanding of factory finishes, delivering even colour across every panel on the street side for both residential and commercial projects. Our own crew paints a sample of the approved colour on the door first, and the written scope names the cleaner, the primer for any bare steel and the number of acrylic topcoats.
From washing chalk and grime out of a garage door's stamped panels to the final coat on the entry door and its frame, our team handles every detail. Serving Temecula, Temescal Valley, French Valley and Harmony Grove, we work around your cars, your deliveries and the hours your driveway is needed.
Why Temecula Premier Painting
The person who looks at your walls is the person you call back, from the estimate to the final walk.
When an association sends a notice about a faded garage door or front door, bring the notice to the estimate. Whatever colour and date it names, the scope and the start date are written around them, so the work is scheduled to finish ahead of that deadline rather than chasing it. Temecula grew through master-planned communities such as Redhawk, which the city annexed in 2005, and an owner in an association lives under its covenants, conditions and restrictions. Those rules can limit exterior choices, paint colours included, which is why a door that has drifted from the approved shade draws a letter.
Bringing a door back to the colour already on file is the simple case. We paint a sample on the door and compare it in daylight with the approved chip and with a neighbor's door in the same scheme before the full coats go on.
A change usually needs architectural approval first. California Civil Code section 4765 requires an association's decision on a proposed change to be in writing, and a disapproval has to explain why and describe how to ask the board to reconsider at an open meeting. We give you the product name and colour name for the application, so the committee sees exactly what will go on the door.
Many garage doors on Temecula streets are sectional steel: panels pressed from sheet steel to look like a raised-panel wooden door, hinged together and rolling on tracks. Their factory coating is slick, and new paint over a dirty or glossy surface is what peels in sheets two summers later.
The door is washed with a cleaner that removes dirt, oil, wax and mildew, then rinsed, because anything left on the factory finish sits between it and the new paint.
Imperfections are lightly buffed or sanded, and any spot where bare metal shows gets a primer made to protect galvanized steel from rust.
One door manufacturer's own instructions call for a high-quality 100 percent acrylic exterior latex and warn against oil-based paint, and we follow the door maker's directions on temperature and sunlight while it goes on. Before any of that, check your paperwork. The same manufacturer states that non-factory painting voids its paint finish warranty, so if your door is new enough to still be covered, it is worth knowing before you book.
Temecula has a hot semi-arid climate, with August usually the hottest month and dry Santa Ana winds from the northeast in late fall and winter. A garage door that faces west or south takes the full afternoon sun on top of that, and it is usually the one the association notices first.
Colour choice matters more on those doors than anywhere else on the house. A door manufacturer warns that a dark colour on an insulated steel door can cause thermal bowing, because the panels are held at each end while a big temperature difference builds across them, and it advises against dark shades on wood garage doors with southern or western exposure. So on a sun-facing door we talk through a lighter shade within your approved palette before anyone opens a can.
Wood doors are sanded lightly, primed and given two coats of exterior paint. The added paint weight can affect the spring settings, so if the door starts to feel heavy afterward, a garage door technician should check the balance.
A front door is painted where it hangs, so the house is never left without a lockable door. The handle set, kick plate and knocker are removed or masked, the weatherstripping is protected, and the face, edges and frame are cleaned and scuff-sanded before an exterior enamel goes on.
Wood, steel and fiberglass entry doors each prep differently, and the walk tells us which you have. A wood door with bare spots is spot primed, a steel door with rust at the bottom rail is cleaned back and primed, and a fiberglass door is cleaned and dulled so the enamel bonds.
The door is propped open while the enamel firms up, with the opening guarded, and it is not pulled tight against the weatherstripping until the product data sheet says the finish can take it. A tacky door closed too soon sticks to the seal and tears the new coat.
Front door painting in Temecula is typically estimated at roughly $200 to $700 for one entry door, and most door jobs here, from a single front door up to a front door plus a double garage door, are typically estimated at roughly $200 to $900. The count of doors and their condition decide where yours lands.
All of these are estimates and subject to change. The written quote, prepared after we see the doors, sets your final price.
A board that wants every garage door in a phase repainted to one approved colour is buying a different job from a single homeowner. That work runs through our HOA and community repaint path, with product data for the committee, a sample door approved before the rest, and a written schedule by street so residents know which day to leave the door down.
Landlords and property managers with a handful of rental houses can book the street-facing doors on all of them at once, and the estimate is written per address so each owner's account is clear.
For your own home, call with the notice or a photo of the door, and we will walk it, sample the colour and leave a written estimate.
The process
Four steps, and no paint goes on until you have signed off on the scope and the colors.
We go around the house or property with you, check the stucco, the trim and the existing coating, and note what inland sun, dust and dry Santa Ana winds have done to each elevation.
The prep, products, colors and dates arrive in writing. For a community or a commercial building the scope is split into phases, so every resident or tenant knows their day.
Washing, scraping, patching and caulking come before any color, since that is what the new coating grips. Primer follows where the surface needs it, then the finish coats.
We walk the job again together before calling it finished, and touch up anything you flag.
Questions
Most door jobs here are typically estimated at roughly $200 to $900, from one front door at the low end to a front door and a double garage door at the high end. Your written quote sets the final price.
Not usually to restore the colour already approved, but a new colour generally needs architectural approval first. California Civil Code section 4765 requires the association's decision to be in writing, and we supply the product and colour names for your application.
That is how the job is scheduled. Bring the notice to the estimate, and the start date is set against its deadline, with the dates written on your estimate.
It can. At least one major manufacturer states that non-factory painting voids its paint finish warranty, so check your door's paperwork before booking if it is still under coverage.
It can, but on an insulated steel door that faces the afternoon sun a dark colour can cause thermal bowing, so we suggest the lightest shade your association allows on a west or south exposure.
No. It is painted in place so the house stays lockable, with the hardware removed or masked, and it is kept open until the enamel can close against the weatherstripping without sticking.
A high-quality 100 percent acrylic exterior latex over a clean, scuffed surface, with a galvanized steel primer on any bare metal, which is what the door maker's own instructions call for. Oil-based paint is not used.
Yes, if you want them included. The frame, side lites and the trim around the garage opening are listed as separate lines on the estimate so you can add or leave them.
Homeowners get a free estimate at the property. Boards, managers and builders can send plans or a unit count for a bid.
Licensed, insured and bonded · License #585047. Calls only, we do not receive text messages.
